Hud Kitchen Cabinets

Know About HUD Severe Use Kitchen Cabinets

The kitchen cabinets have the utmost impact on the overall appearance of a kitchen. They are the main areas that are changed when your kitchen is being remodeled. So you have to make sure that your kitchen cabinets are beautiful, stylishly-made and extremely functional.

With the seemingly endless choices, selecting the style and material that you want for your kitchen cabinets can be overwhelming and can eat up much of your time. The fundamental design for kitchen cabinetry is a straight line the kitchen's longest wall. It is way too easy to make but it isn't the most artistic and creative cabinet lay out.

If you are planning to install cabinets for your kitchen, why not choose HUD Severe Use kitchen cabinets? With solid hardwood material, HUD severe use kitchen cabinets are made to last. They meet the meticulous "Severe Use" specifications that guarantee long service life. These cabinets are have been tested and certified by the Kitchen Cabinet Manufacturers Association. Produced to exceed the industry standards both for performance and construction, HUD Severe Use cabinetry is well-suited to public housing.

Among the features of HUD Severe Use kitchen cabinets are:

Face Frames - shall be constructed of ¾ inch thick kiln dried hardwood without knots and chosen for tight uniform color, making it fit for a natural finish. The frames are to be glued, screwed, filled and sanded to be able to deliver long-term strength and rigidity. The stiles must be 2 inches wide and the mulls must have a minimum width of 2 inches. Rails, on the other hand, shall be 2 inches wide.

End Panels - the exposed ends of the cabinets shall be made of minimum 2-2 grade, ½ inch thick 5-ply hardwood plywood that's chosen for light uniform color. The cabinet ends that aren't exposed can be made up of ½ inches softwood plywood

Back Panel - all HUD Severe Use kitchen cabinets are required to use ¼ inch thick plywood that are glued and nailed or stapled strongly and securely to the cabinet's cleats, ends and shelves.

Wall Cabinet Bottoms - shall be constructed of ½ inch plywood with a front edge that's hardwood banded.

Base Bottoms - shall be made of ½ inch thick 2-2 grade plywood. The bottom shall be held up by ¾ inch thick tough lumber braces that are pressure treated.

Drawers - the front profile of the drawers should match the door's profile. The side and back portions should be constructed of minimum of 11/16 inches solid lumbers with four sided drawer box that's made with locking joints. The front of the drawers must be screwed and glued to the drawer box and the bottom must be dadoed into the four sides. The bottom of the drawers should be made up of minimum of ¼ inch plywood. All the parts of the drawer need to be glued and stapled or nailed together. The drawers should be mounted on a pair of metal side rails that are ball-bearing and with 75 lb. capacity.

Hardware - the hardware for your HUD severe use kitchen cabinets must be corrosion resistant. All the hinges need to be full-wrap, partially-concealed.

Finish - the exposed surfaces as well as the interior of the HUD severe use kitchen cabinets should be factory finished.

Countertops - these parts of the cabinet must be post shaped, high-pressure plastic that's laminated to a ¾ inch thick plywood. The ends as well as the countertops' bottom front edge must have a firm wood mould. Also, the edge of the countertop must be no-drip.

Fittings - to ensure precise job fit, fillers and scribe mold must be used.

The contractors of the public housing in the United States must utilize only those cabinets bearing the approved seal of the KCMA Certified Manufacturers of HUD Severe Use Kitchen Cabinets.

Kitchen Cabinets

Hud Kitchen Cabinets

Know About HUD Severe Use Kitchen Cabinets

Articles